Achieve 4K Ultra HD pass-through plus HDR and 3D support via HDMI with the Onkyo TX-RZ820 7.2-Channel Network A/V Receiver. It produces up to 130W of power per discrete channel at 8 Ohms for room-filling sound. AccuEQ sound optimization will allow you to tailor the sound to your room’s specific acoustics.
Built-in Bluetooth connectivity lets you listen to music wirelessly from your favorite Bluetooth-capable devices while built-in Wi-Fi connectivity provides access to your Spotify or TIDAL apps. You can also attach a USB drive to the USB port on the back panel to play your stored multimedia files. The TX-RZ820 is equipped with seven HDMI inputs and two HDMI outputs. One of the HDMI outputs supports ARC for the reproduction of TV-based audio, such as your TV’s built-in apps.
| Channels | 7.2 |
| Power Output per Channel | 130 W per channel (8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2-channels driven, FTC) 250 W per channel (6 Ohms, 1 kHz, 10% THD, 1-channel driven) |
| Dynamic Power per Channel | 150 W (8 Ohms, front) 250 W (4 Ohms, front) 300 W (3 Ohms, front) |
| THD & Noise | 0.08% (20 Hz to 20 kHz, half power) |
| Input Sensitivity and Impedance | 200 mV/47 kOhms (Line) 3.5 mV/47 kOhms (Phono MM) |
| RCA Output Level and Impedance | Pre-Out, Rated: 1.0 V/320 Ohms Subwoofer Pre Out, Rated: 1.0 V/470 Ohms Zone 2/3 Line Out, Rated: 200 mV/2.3 kOhms Zone 2/3 Pre-Out, Rated: 2.0 V/2.3 kOhms |
| Phono Overload | 70 mV (MM, 1 kHz, 0.5%) |
| Frequency Response | 5 Hz to 100 kHz / +1 dB, -3 dB (Direct Mode) |
| Tone Control | Bass: ±10 dB, 90 Hz Treble: ±10 dB, 7.5 kHz |
| Signal-to-Noise Ratio | 106 dB (line, IHF-A) 80 dB (phono, IHF-A) |
| Speaker Impedance | 4 to 16 Ohms |
| Dolby | Dolby Atmos, Dolby TrueHD, Dolby Surround |
| DTS | DTS:X, DTS-HD Master Audio, DTS Neural:X |
| Input Sensitivity/Output Level and Impedance | Component Y: 1.0 Vp-p/75 Ohms Component PB/CB, PR/CR: 0.7 Vp-p/75 Ohms Composite: 1.0 Vp-p/75 Ohms |
| Component Video Frequency Response | 5 Hz to 100 MHz/+0, -3 dB |
| Tuning Frequency Range | FM: 87.5 to 107.9 MHz AM: 530 to 1710 kHz |
| FM/AM Preset Memory | 40 stations |
| Wi-Fi | Yes, dual-band (2.4 and 5 GHz) IEEE 802.11a/b/g/n |
| Bluetooth | Yes |
| Apple AirPlay Certified | Yes |
| Inputs | 7 x HDMI (1 front) 2 x component video 2 x composite video 1 x digital coaxial 2 x optical TOSLINK 6 x stereo RCA 1 x stereo RCA phono 1 x 1/8″ (3.5 mm) audio (front) 1 x USB |
| Outputs | 2 x HDMI 1 x 7-channel pre-out 1 x stereo RCA zone 2 line out 1 x stereo RCA zone 3 line out 2 x subwoofer pre-out 1 x 1/4″ (6.35 mm) headphone (front) |
| Other Interfaces | 1 x Ethernet 1 x setup mic in (front) 1 x IR in 1 x RS-232 in 1 x 12 V trigger out 1 x AM antenna 1 x FM antenna 1 x ground screw |
| Speaker Connectors | 11 x binding post pairs |
| Zone 2 Audio Output | Powered and pre-out |
| Zone 3 Audio Output | Pre-out |
| Power Requirements | 120 VAC, 60 Hz |
| Power Consumption | Typical: 650 W On, No Sound: 70 W Standby: 0.15 W |
| Dimensions | 17.1 x 7.95 x 15.55″ (435 x 202 x 395 mm) |
| Weight | 30.9 lb (14 kg) |
